Step 3: Dry-Fit the Carcasses

arranging and clamping together the pieces of the storage carcasses for a storage bed
Photo: Laura Moss
«»
Arrange the three carcasses as they will be assembled, and clamp them together at the foot. Measure the length and width of the void between the carcasses, as shown. Unclamp them and prime all surfaces.
Ask TOH users about Furniture

Contribute to This Story Below

    Tools List

    • bar clamp
      Long bar clamps
    • straightedge guide
      Straightedge
    • circular saw
      Circular saw
    • impact driver
      Drill/driver or impact driver
    • paintbrushes
      Paintbrushes
    • miter saw
      Miter saw
    • brad nailer
      Brad nailer or nail gun
    • japanese pull saw
      Jigsaw or Japanese handsaw
    • paintroller
      Paint roller and tray
    • caulk gun
      caulk gun

    Shopping List

    ¾-inch medium-density fiberboard (MDF)
    Get five 4-by-8-foot sheets.

    -inch MDF beadboard panelsGet two 4-by-8-foot sheets.

    1x2 primed MDF trim
    Get eleven.

    8-foot lengths for the stiles, rails, and cap.

    2x4s
    Get three 8-footers.

    Victorian-era door-casing kit (includes rosettes)½x3 lattice strip shoe molding
    Get 20 feet.

    1¼-, 1½-, and 2-inch MDF screws

    2½-inch deck screws

    1½-inch 18-gauge brads

    Construction adhesive

    Wood glue

    ¾-inch quarter-round

    150-grit sandpaper

    Primer and paint