Step 7: Drill Drainage Holes in the Liner

Tom Silva drills holes in a plastic tub for drainage
Photo: Anthony Tieuli
«»
Turn the utility tub upside down, and use a drill/driver to bore six or more evenly spaced ⅜-inch-diameter holes through the bottom. These holes are necessary to allow excess water to drain from the soil.
Next

Related Content

Ask TOH users about Gardening
Discuss

Contribute to This Story Below

Add Comment

    More in Yard & Garden

    Tools List

    Close
    • miter saw
      Miter saw
    • drill
      Drill/driver
    • one-and-a-half inch paintbrush
      Brush for stain

    Shopping List

    Close
    All lumber is pressure-treated.

    3¼-inch-square deck posts. Get four.

    1x6. Get four 8-foot boards.

    2x2 balusters. Get five 42-inch balusters.

    2-inch deck screws

    2½-inch deck screwsDeck stain

    Two or more double hooks for the ends, plus fasteners

    A plastic utility tub at least 6 inches deep.
    (Ours was 24 by 36 by 8.)

    Gravel

    Potting soil