-
How to Build a Planter Bench
-
How to Build a Pyramid Trellis
-
How to Build a Potting Bench
-
How to Build a Privacy Planter
Introduction
Overview
Step 1
Crosscut the 2x4 to Length
Step 2
Miter the Post End
Step 3
Cut the Wiring Channel
Step 4
Remove the Waste Wood
Step 5
Set the Cable in the Groove
Step 6
Mark the 1x6 Arms
Step 7
Cut the Pieces
Step 8
Lay out the Cladding
Step 9
Position the 2x4 Parts
Step 10
Join the Post Parts
Step 11
Bore the Dowel Holes
Step 12
Trim the Dowels
Step 13
Bevel-Rip the Base
Step 14
Miter-Cut the Base
Step 15
Attach the Base to the Post
Step 16
Sink the Post
Step 17
Hang the Lantern
Contribute to This Story Below