Step 2: Cut the Two Wood Straps

Cut the Two Wood Straps to build a table from salvage beams
Photo: Kristine Larsen
«»
Cut the two wood straps, and bevel the ends using a compound miter saw. The straps should be a few inches shorter than the width of the three beams clamped edge to edge.
Next

Related Content

Ask TOH users about Salvage
Discuss

Contribute to This Story Below

Add Comment

    More in Remodels & Upgrades

    Tools List

    Close
    • pipe wrench
      Pipe wrench
    • miter saw
      Compound miter saw
    • t-square
      T-square
    • Pencil
    • hand clamps
      Clamps
    • circular saw
      Circular saw
    • drill
      Drill/driver
    • 3/8-inch spade bit
      Spade bit
    • socket wrench
      Socket wrench
    • dust mask
      Dust mask
    • safety glasses
      Protective glasses
    • random orbit sander
      Random-orbit sander
    • 2-and-a-half-inch paintbrush
      Paintbrush
    • Chamois or lint-free rag
      Lint-free rag

    Shopping List

    Close
    ¾-inch gas pipe and corresponding elbows, flanges, and tee connectors

    Salvaged 2x8 joists for the straps

    Salvaged beams for the top

    ½-by-3 ½-inch lag screws2½-inch wood screws

    60-, 80-, and 120-grit sandpaper

    Shellac

    Beeswax polish