«»
Go over the trim and backband molding with fine-grit sandpaper, and coat with primer and latex paint in a color of your choice.
Step 7: Sand the Trim and Backband Molding
Introduction
Overview
Step 1
Mask Off the Chalkboard Area
Step 2
Apply the Chalkboard Paint
Step 3
Mark Off the Chalkboard Frame Area
Step 4
Cut the Plywood Frame
Step 5
Hot-Glue the Tile to the Frame
Step 6
Cut the Trim for the Chalkboard Frame
Step 7
Sand the Trim and Backband Molding
Step 8
Glue the Trim and Backband Molding to the Frame
«»
More in Interior
Tools List
-
Gloves for handling tin
-
Paintbrushes
-
Ruler or combination square
-
Jigsaw
-
Hot-glue gun
-
Miter saw
Shopping List
24-inch-square tin ceiling tile
Painter's tape
Very-fine-grit and fine-grit sandpaper
Red-oxide metal primer
Brush-on chalkboard paint
¼-inch plywood
¼-by-2-inch hardwood strips
Backband molding
Primer
Latex paint in a color of your choice (for frame)
Wood glue
Painter's tape
Very-fine-grit and fine-grit sandpaper
Red-oxide metal primer
Brush-on chalkboard paint
¼-inch plywood
¼-by-2-inch hardwood strips
Backband molding
Primer
Latex paint in a color of your choice (for frame)
Wood glue
Contribute to This Story Below