Step 3: Repeat Step 2 with the Batting

Repeat Step 2 with the batting, adding a few inches on each side so that you can pull the batting over the edge of the plywood when you secure it.
Ask TOH users about Furniture

Contribute to This Story Below

    Tools List

    • hand saw
    • utility knife
      Utility knife
    • staple gun
      Staple gun and staples
    • hand clamps
      Clamps (optional)
    • mallet
      Rubber mallet
    • drill

    Shopping List

    ½-inch plywood cut to the width of your bed frame and desired height

    ½-inch-thick foam to cover one side of the plywood


    Spray adhesive

    3 yards of upholstery fabric

    Nailhead trim