Step 3: Install the Brackets

person drilling brackets into porch
Photo: Kolin Smith
«»
Center the installation brackets inside the post outline on the awning and over the marks on the landing, and screw them in place. For the landing brackets, use self-tapping concrete screws.
Ask TOH users about Porch

Contribute to This Story Below

    Tools List

    • ladder
      ladder
    • drill
      drill/driver
    • plumb bob
      plumb bob
    • combination square
      combination square
    • jigsaw
      jigsaw
    • circular saw
      circular saw to trim posts' height
    • jack post
      jack posts to lift the awning, if post installation requires them

    Shopping List

    1. 2x6 supports: Get two 12-footers

    2. 2x4 scraps to make a footplate for each 2x6 support

    3. Wood stakes to hold 2x6 supports in place

    4. Wood screws to attach 2x6 supports to the awning

    5. Self-tapping concrete screws to attach brackets to the landing