Step 12: Lay the Final Courses

lay the final courses to build a stone planter
Photo: Kolin Smith
«»
Layer the final two courses on top of the landscaping fabric, then add the cap blocks, finish-side up. Scribe and cut them to fit as needed. (For custom cuts, create your own score line by chiseling a V-shaped channel all the way around the block.) Top off the planters with potting soil, and plant your favorite blooms.
Ask TOH users about Yard & Garden

Contribute to This Story Below

    Tools List

    • spade
      spade
    • garden stakes
      stakes
    • mason line and level
      mason line and line level
    • square shovel
      shovel
    • tamper
      hand tamper
    • iron rake
      steel rake
    • mallet
      rubber mallet
    • two-foot level
      2-foot level
    • mason's chisel and maul
      mason's chisel and maul
    • brick hammer
      brick hammer
    • caulk gun
      caulk gun
    • craft scissors
      scissors to cut the landscape fabric

    Shopping List

    Cast-concrete blocks
    Choose those meant for freestanding and retaining walls, not walkway pavers. To calculate how many blocks you need, divide the area, in inches, of each wall by the area of the largest block's face. Add 10 percent to cover cuts and breakage.

    Paver base
    A 50-pound bag covers 2 square feet at 3 inches deep

    Leveling sand
    A 50-pound bag covers about 6 square feet at 1 inch deep. Drainage stone
    Get enough to fill your planters to three courses from the top.

    Masonry construction adhesive

    Landscape fabric

    Topsoil