Step 6: Hang the Shutter Doors

Tom Silva attaches the shutter doors to the bookcase/cabinet
Photo: Allison Dinner
«»
Lay the shutters on the face of the cabinet. Screw two H-hinges to the outside edge of each door and to the sides of the cabinet, using the included fasteners.
Ask TOH users about Cabinets & Shelving

Contribute to This Story Below

    Tools List

    • circular saw
      Circular saw
    • miter saw
      Miter saw
    • Phillips screwdriver
      Screwdriver
    • drill
      Drill/driver
    • pneumatic brad nailer
      Pneumatic brad-nail gun
    • sandpaper
      120-grit sandpaper
    • 2-and-a-half-inch paintbrush
      Paintbrush

    Shopping List

    1. 1¼-inch brad nails to secure the top and bottom to the bookcase, and to trim the cabinet. If necessary, they will also be used to attach the header.

    2. Corner foot plates. Get four.

    3. Furniture feet. Get four.4. Magnetic door catch. Get two.

    5. H-hinges. Get four.

    6. Knobs. Get two.

    7. Primer-sealer. Get one quart.

    8. Paint. Get one quart in a satin or semigloss finish.