«»
Mock up the spacing on the wall in pencil so that you'll see where to install each trim piece.
Step 1: Mock Up the Panel Spacing
Introduction
Overview
Step 1
Mock Up the Panel Spacing
Step 2
Install the Top Rail
Step 3
Install the Stiles
Step 4
Install the Middle Rail
Step 5
Fill Nail Holes, Sand and Seal
Step 6
Prime and Paint
«»
More in Molding & Carpentry
Tools List
-
Handsaw or miter saw
-
Brad nailer
Shopping List
1. ½-by-4-inch medium-density fiberboard (MDF) trim
2. Panel adhesive
3. Brad nails
4. Joint compound
5. Sandpaper
6. Paintable caulk
7. White paint
2. Panel adhesive
3. Brad nails
4. Joint compound
5. Sandpaper
6. Paintable caulk
7. White paint
Contribute to This Story Below