Step 4: Assemble the Trellis

Assemble the Trellis to build a pyramid trellis
Illustration: Gregory Nemec
«»
Position the peak of the A against the nailing ledge, flush to the left edge of the finial. Drill pilot holes and screw it in place. Repeat on all sides. Finally, screw through pilot holes in the face of one framing strip and into the adjacent one's edge at each corner of the trellis.
Ask TOH users about Outdoor Structures

Contribute to This Story Below

    More in Landscaping

    Tools List

    • circular saw
      Circular saw
    • miter saw
      Miter saw
    • pneumatic brad nailer
      Pneumatic nail gun
    • hand clamps
      Clamps

    Shopping List

    1. ½x2-inch cedar strips
    to make the four sides

    2. 4x4-inch cedar post
    to make the finial3. -inch nails
    for the nail gun