Step 3: Patch Holes

hammering in scrap wood to fill holes in a repurposed door
Photo: Kristine Larsen
«»
To fill the void in the edge of the door where the lock used to be, tap in a wood scrap. For the surface holes, make a matching putty out of glue mixed with sawdust left over from your offcuts. Spread with a putty knife.
Next

Related Content

Ask TOH users about Salvage
Discuss

Contribute to This Story Below

Add Comment

    More in Remodels & Upgrades

    Tools List

    Close
    • 30-foot tape measure
      Measuring tape
    • combination square
      Combination square
    • circular saw
      Circular saw
    • 12-inch stainless steel ruler
      Large steel ruler
    • hand clamps
      Clamps
    • finish hammer
      Hammer
    • putty knife
      Putty knife
    • random orbit sander
      Random-orbit sander
    • shop vacuum
      Shop vac
    • drill
      Drill/driver
    • spade bit
      ⅜-inch paddle bit
    • brad nailer
      Brad nailer (optional)
    • dust mask
      N100 dust mask


    • safety glasses
      Safety glasses


    Shopping List

    Close
    1. Paneled wood door

    2. White craft glue

    3. Solid crown molding

    4. 4D Finishing nails

    5. Furniture polish

    6. Sconces