Step 3: Attach the Legs

an illustration focusing on the legs of a potting bench
Illustration: Gregory Nemec
«»
Screw the lower support blocks to the legs. Prop up the bottom shelf on the blocks and secure it to the legs. Screw the middle support blocks to the legs. Rest the work surface on the blocks and secure it to the legs. Screw the upper support blocks to the legs.
Next

Related Content

Ask TOH users about Outdoor Structures
Discuss

Contribute to This Story Below

Add Comment

    More in Landscaping

    Tools List

    Close
    • jigsaw
      Jigsaw
    • miter saw
      Miter saw
    • drill
      Drill/driver
    • staple gun
      Staple gun

    Shopping List

    Close
    Pressure-treated 2x4s: Get eight 6-foot boards.

    Pressure-treated 2x6s: Get five 6-foot boards.

    Pressure-treated 2x2s: Get two 6-foot boards.

    5/4x6 deck boards: Get one 8-foot board.

    5/4x4 deck boards: Get one 8-foot board.Galvanized wire mesh: Get a piece at least 22 by 34 inches.

    3-inch stainless-steel trim-head screws

    2½-inch stainless steel trim-head screws

    ⅜-inch staples