1. 1x15 edge-glued shelving. Get four 6-foot boards and one 3-foot board to make the sides, top, bottom, shelves, and wine-rack insert.
2. 1x3 to create support strips for the bottom board.
3. ⅝-inch square dowels to make the glass rack. Get two 3-foot lengths.
4. ⅜x3 lattice strips to make the glass rack. Get two 3-foot lengths.
5. 3¼-inch baseboard molding: Get a 6-foot length.
6. 3⅝x9/16-inch crown molding: Get a 6-foot length.
7. 2x4 to make the backing strips for the crown molding
8. 1x2 to make the face-frame stiles: Get two 6-foot boards in clear pine.
9. 1x5 to make the face-frame rails: Get at least 3 feet in clear pine.
10. 5mm lauan for the backing. Get one 4x8 sheet.
11. 1½-inch brad nails
12. ⅝-inch brad nails
13. 1¼-inch drywall screws
Contribute to This Story Below