Step 10: Assemble the table

assemble the display coffee table
Photo: Ryan Benyi
«»
Place the acrylic sheet on the table's base so that, as you're looking down on it, its corners match the corners of the legs. Place the frame on top so that it locks around the acrylic and the legs. Fill the fastener holes and joints with wood filler, then sand and paint the entire assembly.
Next

Related Content

Ask TOH users about Furniture
Discuss

Contribute to This Story Below

Add Comment

    More in Interior

    Tools List

    Close
    • miter saw
      Miter saw
    • jigsaw
      Jigsaw
    • drill
      Drill/driver fitted with a countersink drill bit
    • pneumatic finish nailer
      Pneumatic nail gun

    Shopping List

    Close
    1. ½-inch plywood to make the floor. Get a 24-by-48-inch piece.

    2. Baseboard to make the tabletop fame. Get two 8-foot boards.

    3. 1x5 to make the apron. Get two 8-foot boards.

    4. 1x1 to make the cleats and the lip of the tabletop frame. Get three 8-foot boards.

    5. Table legs. Get four.

    6. Acrylic sheet. Get a piece at least 30 by 60 inches. 7. 1-inch nails

    8. 2-inch nails

    9. 1 ¼-inch screws

    10. 2-inch screws

    11. Permanent marker

    12. Wood glue

    13. A cyanoacrylate glue, such as Super Glue