-
How to Build a Planter Bench
-
How to Build a Pyramid Trellis
-
How to Build a Pathway Lamppost
-
How to Build a Potting Bench
Introduction
Overview
Step 1
Make Pilot Holes for the Post Anchors
Step 2
Set the Post Anchors
Step 3
Level and Square the Post Anchors
Step 4
Dry-fit the Pieces
Step 5
Assemble the Legs
Step 6
Install the Legs
Step 7
Cut and Assemble the Seat Base
Step 8
Attach the Base and Lower Crosspieces
Step 9
Cut the Pieces and Install the Side Supports
Step 10
Secure the Center Support
Step 11
Cut the Seat Boards
Step 12
Attach the Seat Boards
Step 13
Attach the Backrest Boards and Cap the Top
Step 14
Install the Remaining Crosspieces and Vertical Strips
Step 15
Cut and Install Horizontal Strips
Step 16
Cut the Pieces and Draw the Tail Profile
Step 17
Cut the Rafter Tails
Step 18
Install the Rafters
Step 19
Install the Purlins
Contribute to This Story Below