Step 2: Secure the Housing and Ground Wire

secure the housing and ground wire to rewire an all-weather lantern
Photo: Kristine Larsen
«»
Secure the housing and ground wire to the lantern by inserting the protruding end of the screw into the hole at the top of the fixture. Slip the ground wire's ring over the screw and twist on a hanging loop.
Ask TOH users about Lighting

Contribute to This Story Below

    Tools List

    • wire strippers
      Wire stripper
    • Phillips screwdriver
      Phillips-head screwdriver
    • lineman's pliers
      Pliers (heavy-duty chain pliers work best)

    Shopping List

    Deep Leaf cast-iron ceiling canopy in antiqued-bronze finish, including hanging loop and mounting hardware

    1½-by--inch plated steel chain in antiqued-brass finish

    2-inch brass socket housing (helps protect socket from the weather)

    Leviton medium-size porcelain keyless socket with die-cast cap and set screw-inch brass hanging loop with wireway

    1-inch threaded hollow brass screw 'nipple'

    Copper ground wire with attached ring (the safest bet for exterior lighting)

    Black standard lamp wire