Step 2: Attach the Panels and Floor Support

attach the panels and floor support to build a wood hamper
Illustration: Gregory Nemec
«»
Secure front and back panels to the back sides of the 1x3 leg pieces, 2 inches from the ends. Secure side panels to the back sides of the 1x2 leg pieces. Secure floor supports between the front and back panels.
Next

Related Content

Ask TOH users about Laundry Room
Discuss

Contribute to This Story Below

Add Comment

    More in Workspaces

    Tools List

    Close
    • circular saw
      circular saw
    • miter saw
      miter saw
    • jigsaw
      jigsaw
    • brad nailer
      brad nailer
    • drill
      drill/driver

    Shopping List

    Close
    1x2 Get one 8-foot length for the four narrower leg pieces.

    1x3 Get three 8-foot lengths for the four wider leg pieces, crosspieces, floor supports, and lid frame

    ⅜-inch beadboard plywood Get half of a 4x8 sheet to make the panels and floor (½-inch plywood can also be used for the floor)2-inch trim-head screws to secure upper crosspieces to the legs.

    ⅝-inch brad nails

    Wood glue

    Butt hinge Get two.

    Top hinge Get one.

    Sash handle Get one, if using.