Illustration: Gregory Nemec
«»
Secure the edge of a 1x2 leg piece to the face of a 1x3 leg piece, flush with its edge, to form an L. Repeat to make four legs.
Step 1: Build the Legs
Introduction
Overview
Step 1
Build the Legs
Step 2
Attach the Panels and Floor Support
Step 3
Trim Hamper and Insert Floor
Step 4
Assemble and Attach Lid
More in Workspaces
Tools List
-
circular saw
-
miter saw
-
jigsaw
-
brad nailer
-
drill/driver
Shopping List
1x2 Get one 8-foot length for the four narrower leg pieces.
1x3 Get three 8-foot lengths for the four wider leg pieces, crosspieces, floor supports, and lid frame
⅜-inch beadboard plywood Get half of a 4x8 sheet to make the panels and floor (½-inch plywood can also be used for the floor)2-inch trim-head screws to secure upper crosspieces to the legs.
⅝-inch brad nails
Wood glue
Butt hinge Get two.
Top hinge Get one.
Sash handle Get one, if using.
1x3 Get three 8-foot lengths for the four wider leg pieces, crosspieces, floor supports, and lid frame
⅜-inch beadboard plywood Get half of a 4x8 sheet to make the panels and floor (½-inch plywood can also be used for the floor)2-inch trim-head screws to secure upper crosspieces to the legs.
⅝-inch brad nails
Wood glue
Butt hinge Get two.
Top hinge Get one.
Sash handle Get one, if using.
Contribute to This Story Below