Step 5: Sand

man using sanding block to smooth out rough molding
Photo: Misty Keasler
«»
Check how well the rough molding and the block fit together; trim the block until they mate up. Stick 80-grit sandpaper to the sanding block with double-sided tape and smooth out the rough molding. Replace the paper as needed. Finish sanding with 100-grit paper.
Next

Related Content

Ask TOH users about Trim
Discuss

Contribute to This Story Below

Add Comment

    More in Molding & Carpentry

    Tools List

    Close
    • Pencil
    • table saw
      Table saw
    • router
      Router and router table
    • Band saw

    Shopping List

    Close
    1. 80-grit sandpaper2. Double-sided tape