Introduction
Overview
Step 1
Mark a Level Line and Create a Layout
Step 2
Affix the Liner to the Walls
Step 3
Cut the First Panel to Size
Step 4
Wet the Backs of the Panels
Step 5
Apply Adhesive
Step 6
Place the Panel
Step 7
Remove Air Bubbles
Step 8
Mark the Cut Line
Step 9
Trim Away the Excess
Step 10
Turn the Corner
Step 11
Put Up the Remaining Panels
Step 12
Clean the Panels
Step 13
Fill the Corners and Joints
Step 14
Apply the Primer and Paint
Step 15
Add the Highlights
Step 16
Install the Molding
-
Shop TOH on Wayfair.com
-
2013 Reader-Created Issue
-
Contests and Sweepstakes
Contribute to This Story Below