Step 3: Secure the Interior Hardware

Fit the lock over the projecting cylinder post, and put the knob's spindle-and-rosette assembly on the thumb-latch post. Fasten both with mounting screws. Next, fit the knob on the spindle and tighten its setscrew. To steady the base of the handle, insert a mounting screw, and hide its head with the decorative cover supplied. Finally, finish off your front-door transformation by drilling holes for and fastening the new knocker and kickplate.
Ask TOH users about Doors

Contribute to This Story Below

    Tools List

    • multi-bit screwdriver
    • hex keys
      Hex key
    • drill

    Shopping List

    1. Entry set

    2. Knocker3. Kickplate