Step 1: Remove the Old Entry Set

remove the old entry set
Photo: Ryan Benyi
«»
Remove the old entry set by taking out the mounting screws that secure the interior knob and locking hardware to the exterior handle and lock cylinder. To remove the dead bolt and latch bolt, unscrew their faceplates, located on the door's inner edge. Replace the existing strike and latch plates in the door jamb with the new ones provided with your set.
Ask TOH users about Doors

Contribute to This Story Below

    Tools List

    • multi-bit screwdriver
      Screwdriver
    • hex keys
      Hex key
    • drill
      Drill/driver

    Shopping List

    1. Entry set

    2. Knocker3. Kickplate