Step 11: 11. Continue the Pattern

placing the corner stencil
Photo: Kolin Smith
«»
Repeat Steps 6 through 10, working your way outward from the top stencil. Make sure the paint has dried on the adjacent project area before mounting each stencil, and avoid overpainting areas that overlap where the pattern continues. Between uses, rinse stencils in hot water and dry with a lint-free cloth or paper towel. Flip over the corner stencil to paint the symmetrical pattern at the doorway's corners.
Next

Related Content

Ask TOH users about Painting
Discuss

Contribute to This Story Below

Add Comment

    More in Painting & Finishes

    Tools List

    Close
    • 30-foot tape measure
      Measuring tape
    • black marker
      Fine-tip permanent marker
    • straightedge guide
      Straightedge
    • self-healing cutting mat
      Self-healing cutting mat
    • X-Acto knife
    • electric stencil cutter
      Pane of glass and electric stencil-cutting pen for cutting curved lines. Get one at crafts stores or Amazon
    • small plastic putty knife
      Plastic putty knife
    • small paint tray
      Paper plate or small bucket or tray for holding the paint.
    • stencil brush
      Flat-tip stencil brush. Get a size that suits your pattern's scale and shape. We used a No. 8 brush, which has a diameter of ⅝inch.

    Shopping List

    Close
    1. Stencil film
    Sometimes called template plastic or acetate.

    2. Painter's tape
    for delicate surfaces.(It won’t remove the wall paint.)

    3. Repositionable mounting spray
    4. Old newspapers

    5. Latex paint
    Use a flat or satin finish to achieve a timeworn look.

    6. Lint-free cloths
    or sturdy paper towels for cleaning stencils and to dab when prepping the stencil brush.