Step 9: Lay Out the Pieces

this old house general contractor laying out the pieces to build a freestanding lamp
Photo: Renna Bammi
«»
Arrange the spacers and ledges on a flat surface in assembly order to make sure they'll fully cover the wire rod, as shown.
Next

Related Content

Ask TOH users about Lighting
Discuss

Contribute to This Story Below

Add Comment

    More in Plumbing, HVAC & Electrical

    Tools List

    Close
    • tubing cutter
      Pipe cutter
    • miter saw
      Miter saw
    • circular saw
      Circular saw
    • finish nails, various lengths
      Finishing nail
    • finish hammer
      Hammer
    • drill
      Drill/driver
    • spade bit
      ⅝-inch paddle bit
    • Drill bit
      ⅜-inch drill bit
    • 3-inch wide paint brush
      Paintbrush
    • random orbit sander
      Random Orbit Sander

    Shopping List

    Close
    Hollow metal curtain rod

    at least 48 inches long.



    9-by-12-inch piece of ½-inch plywood

    for the base.



    1x6 lumber:

    Buy at least 4 feet to make the ledges.



    1x3 lumber:

    Buy at least 12 inches to make the feet.



    Threaded wire rod:

    Buy sections to make a rod at least 60 inches long to house the lamp cord.

    Lamp kit:

    Buy one that has a harp, bushing, collar, lamp nut, and lamp cord.



    Lamp cord

    Wood glue

    1-inch screws

    to build the C-shaped assembly and to attach the bottommost ledge to the base.

    Wood putty

    120-grit sandpaper

    Paint