Step 2: Make Two Leg Assemblies

side table construction diagram
Illustration: Gregory Nemec
«»
Clamp two crosspieces between two legs—the straight one even at the top, the curved one at shelf height—with the flats flush to the inside. Drill countersink holes at an angle through the crosspieces and into the legs, and screw them in place. Build a second.
Next

Related Content

Ask TOH users about Furniture
Discuss

Contribute to This Story Below

Add Comment

    More in Interior

    Tools List

    Close
    • miter saw
      Miter saw
    • circular saw
      Circular saw, to cut the tabletop and shelf
    • jigsaw
      Jigsaw, to cut the decorative curves
    • japanese pull saw
      Pull saw, to cut the plugs
    • drill
      Drill/driver, fitted with a combination countersink bit
    • bar clamps
      Clamps

    Shopping List

    Close
    1. Wood glue

    2. 2-inch deck screws

    3. 3/8-inch screw-hole wood plugs

    4. 2x2
    Get two 6-foot lengths to make the legs.

    5. 1x2
    Get one 8-foot length to make the tabletop skirt and upper crosspieces.6. 1x3
    Get one 8-foot length to make the shelf skirt and lower crosspieces.

    7. ¾-inch plywood
    Get a half sheet to make the tabletop and shelf.