Step 6: Attach the Trim

Tom Silva attaches trim to the top of the shelving unit
Photo: Wendell T. Webber
«»
Cut crown molding to size, using a 45-degree miter on both ends of the long piece and a 45-degree return on one end of the two short pieces. Glue and nail molding to the nailing strips on the front and sides of the top shelf.
Ask TOH users about Cabinets & Shelving

Contribute to This Story Below

    Tools List

    • miter saw
      miter saw
    • brad nailer
      pneumatic nail gun
    • drill
      drill/driver fitted with -inch paddle bit and 1/8-inch drill bit

    Shopping List

    1x12 plank shelves Get five 6-foot shelves.

    1x4 Get an 8-foot board.

    1x2 Get an 8-foot board.

    2x2 turned spindles Get 16.

    crown molding Get 10 feet.

    -inch dowel Get 3 feet.½-inch painter's tape

    1-inch finishing nails

    1½-inch finishing nails

    3-inch deck screws

    wood glue