Step 4: Replacing the oil filter

man replacing oil filter of furnace
Photo: Keller & Keller
«»
The oil filter (found in oil-powered systems only) prevents small impurities from clogging the oil-burner nozzle, which could result in a misfire that shuts down the system. Richard first closes the oil valve, then removes the old filter and replaces it, setting aside the dirty filter to be disposed of according to local hazardous-waste regulations.
Ask TOH users about Fall Upkeep

Contribute to This Story Below

    Tools List

    • Phillips screwdriver
      Screwdriver
    • Wire brush
    • shop vacuum
      Shop vacuum
    • strap wrench
      Strap wrench
    • combustion analyzer
      Combustion analyzer

    Shopping List

    1. Foil tape

    2. Oil filter
    (for oil-powered systems)

    3. Air filter

    4. Oil nozzle
    (for oil-powered systems)