Step 1: Shutting down the system

man turning off electrical power for furnace repair
Photo: Keller & Keller
«»
Before performing any maintenance, Richard makes sure to switch off the electrical power and the fuel supply. The distinctive red power switchplate can usually be found at the top of the cellar stairs or near the burner itself, while the fuel shutoff valve is near the oil tank or on the incoming gas pipe. Note the location of both in case of a future leak or fire.
Ask TOH users about Fall Upkeep

Contribute to This Story Below

    Tools List

    • Phillips screwdriver
      Screwdriver
    • Wire brush
    • shop vacuum
      Shop vacuum
    • strap wrench
      Strap wrench
    • combustion analyzer
      Combustion analyzer

    Shopping List

    1. Foil tape

    2. Oil filter
    (for oil-powered systems)

    3. Air filter

    4. Oil nozzle
    (for oil-powered systems)