Step 2: Build the Sides

With the sides laid flat, position the shelf supports and use a strip of scrap to block out a gap for the shelves. Glue and nail the supports to the sides.
Ask TOH users about Cabinets & Shelving

Contribute to This Story Below

    Tools List

    • circular saw
      circular saw
    • miter saw
      miter saw
    • drill
      drill driver

    Shopping List

    1. ¾-inch plywood,

    Get a 4x8 sheet to make the top, sides, and shelf supports

    2. ½-inch plywood,

    Get a 4x4 half sheet for the back

    3. 1x3 Get a 3-foot board for the crosspiece4. 1x4 Get a 6-foot board for the mitered base trim

    5. fluted casing Get 8-feet

    6. chair rail molding Get 8 feet

    7. wood glue

    8. 1-inch trim head screws