Step 7: Cut the Slit for the 1-inch Elastic

people cutting the slit for the elastic band while building a ricochet game board
Photo: Wendell Weber
«»
Lay the long 1x4 side rails flat and parallel to each other on the work surface. Measure and make a mark 6 inches from one end of each board. From there, draw a 2-inch line starting from the top edge with a combination square. Using a jigsaw, cut the line to create a slit in each side.
Ask TOH users about Outdoor Structures

Contribute to This Story Below

    More in Landscaping

    Tools List

    • jigsaw
      jigsaw fitted with a clean-cutting wood blade
    • drill
      drill/driver fitted with a #6 countersink bit
    • combination square
      combination square
    • plastic putty knife
      plastic putty knife

    Shopping List

    72x30-inch lauan hollow-core wood interior slab door

    1x4 exterior preprimed trim boards. Get three 8-foot boards.

    0000 steel wool

    220-grit sandpaper

    1x4 strapping to secure the legs to the door.

    Banquet-table replacement legs. Get a set of two.

    1 5/8-inch deck screws

    Clear-gloss polyurethane. Get 1 quart.Painter's tape

    Spray paint in black satin.

    White latex semigloss paint

    Rub-on numbers

    1-inch sewing elastic

    Ladder-lock buckles (available at sewing stores); get 2

    Wood pucks Get eight: four in one color and four in another