Step 4: Apply the Points Graphics

people applying the point graphics while building a ricochet game board
Photo: Wendell Weber
«»
Cut rub-on numerals from their sheet, remove the protective backing, and place the numbers on the board, as shown. Rub each number with the applicator provided until its facing paper releases.
Ask TOH users about Outdoor Structures

Contribute to This Story Below

    More in Landscaping

    Tools List

    • jigsaw
      jigsaw fitted with a clean-cutting wood blade
    • drill
      drill/driver fitted with a #6 countersink bit
    • combination square
      combination square
    • plastic putty knife
      plastic putty knife

    Shopping List

    72x30-inch lauan hollow-core wood interior slab door

    1x4 exterior preprimed trim boards. Get three 8-foot boards.

    0000 steel wool

    220-grit sandpaper

    1x4 strapping to secure the legs to the door.

    Banquet-table replacement legs. Get a set of two.

    1 5/8-inch deck screws

    Clear-gloss polyurethane. Get 1 quart.Painter's tape

    Spray paint in black satin.

    White latex semigloss paint

    Rub-on numbers

    1-inch sewing elastic

    Ladder-lock buckles (available at sewing stores); get 2

    Wood pucks Get eight: four in one color and four in another