Photo: Wendell Webber
«»
Set the blade of the pull saw on the pipe, using the jig bevels as a guide. Cut through the pipe keeping the blade against the bevels through the entire cut.
Step 3: Cut the Angles
Introduction
Overview
Step 1
Cut the Jig Pieces
Step 2
Build the Jig
Step 3
Cut the Angles
Step 4
Mark a Straight Cut
Step 5
Drill Holes in the Pipes
Step 6
Paint the Pipes
Step 7
Attach the Numbers
Step 8
Attach the Pipes
More in Landscaping
Tools List
-
Pull saw
-
Circular saw
-
Drill/driver fitted with a ¼-inch drill bit
Shopping List
4-inch drainpipe Get one 10-foot length per rack
1x5. Get 6 feet
Stick-on numbersPlastic ties in 11-inch lengths
Tennis balls Get two packs of three in different colors
Spray paint
1x5. Get 6 feet
Stick-on numbersPlastic ties in 11-inch lengths
Tennis balls Get two packs of three in different colors
Spray paint
Contribute to This Story Below