Photo: Wendell Webber
«»
Using linesman pliers, cut a length of fencing 58 inches long. Trim the the cut edge so that the horizontal wires remain exposed for the next step.
Step 4: Cut the wire to size
Introduction
Overview
Step 1
Lay out the rings
Step 2
Cut out the rings
Step 3
Attach the legs
Step 4
Cut the wire to size
Step 5
Fasten the wire seam
Step 6
Paint the rings
Step 7
Set the wire in place
More in Landscaping
Tools List
-
Jigsaw fitted with scroll blade (for plywood) and aggressive blade (for lumber)
-
Drill driver fitted with ⅛-inch bit and ¼-inch bit
-
Linesman pliers
Shopping List
½-inch birch-veneer plywood
2x4 for the legs
4-foot welded-wire garden fencing
2-foot bamboo plant stakes You'll need at least 90
Plastic pit balls Get about 100
220-grit sandpaper
Stain-blocking white primer Spray paint in three colors
⅞-inch wood screws
2 ½-inch trim-head screws
Wood glue
Wood filler
Painter's tape
2x4 for the legs
4-foot welded-wire garden fencing
2-foot bamboo plant stakes You'll need at least 90
Plastic pit balls Get about 100
220-grit sandpaper
Stain-blocking white primer Spray paint in three colors
⅞-inch wood screws
2 ½-inch trim-head screws
Wood glue
Wood filler
Painter's tape
Contribute to This Story Below