Step 4: Assemble the frames and decks

two men assembling frames for cornhole game board
Photo: Wendell Webber
«»
At each corner, screw through the sides into the end pieces with 2 evenly spaced 3-inch deck screws. Attach each deck to its frame with 1¼-inch finish screws. Cover all the fastener holes with wood filler, then sand smooth and apply a coat of primer to the assemblies and legs.

Next

Related Content

Ask TOH users about Outdoor Structures
Discuss

Contribute to This Story Below

Add Comment

    More in Landscaping

    Tools List

    Close
    • jigsaw
      Jigsaw fitted with scroll blade (for plywood) and aggressive blade (for lumber)
    • drill
      Drill driver fitted with ¼-inch and ⅜-inch drill bits
    • pencil compass
      Compass
    • utility knife
      Utility knife
    • putty knife
      Plastic putty knife to seal the painter's tape

    Shopping List

    Close
    ½-inch birch-veneer plywood

    2x4s Get four 8-foot boards

    ⅜-by-3½-inch carriage bolts, washers, and nuts to attach the legs

    1-inch trim-head screws to attach the top

    3-inch deck screws to assemble the frame

    Wood glue

    6½-inch utility pulls Get two Wood filler

    Stain-blocking white primer

    Spray paint

    Painter's tape

    Spray polyacrylic

    220-grit sandpaper

    6-by-6-inch 16-ounce beanbags Get eight