Photo: Wendell Webber
«»
Insert the dowels into the upright, making sure you have the same color rungs at the same position on each rack. Center each dowel in its upright.
Step 6: Insert the rungs
Introduction
Overview
Step 1
Cut the pieces
Step 2
Drill holes for the rungs
Step 3
Assemble the stand
Step 4
Paint all the pieces
Step 5
Bolt the upright to the legs
Step 6
Insert the rungs
Step 7
Drill a hole through each golf ball
More in Landscaping
Tools List
-
Miter saw
-
Drill driver fitted with 1-inch paddle bit and ¼-inch drill bit
-
Paintbrushes
-
Flat-head screwdriver
-
Utility scissors
-
Pull saw
Shopping List
1-inch dowels Get six at 36-inch lengths
2x4s Get two 8-foot boards
Golf balls Get at least 12
3/16-inch twisted nylon rope Get a 10-foot rope
Stain-blocking white primer Get 1 quart Spray paint in at least four colors
Two ¼-by-4-inch carriage bolts
Two ¼-inch washers
Two ¼-inch wing nuts
3-inch deck screws
2x4s Get two 8-foot boards
Golf balls Get at least 12
3/16-inch twisted nylon rope Get a 10-foot rope
Stain-blocking white primer Get 1 quart Spray paint in at least four colors
Two ¼-by-4-inch carriage bolts
Two ¼-inch washers
Two ¼-inch wing nuts
3-inch deck screws
Contribute to This Story Below