Step 9: Mount Power Strip

Tom Silva and Amy Paladino mount a power strip to the side of the tool bench
Photo: Allison Dinner
«»
Measure the distance between the mounting holes on the back of the power strip. Mark their locations on the side of the bench, above the pegboard. Install the screws and mount the power strip to the side of the bench.
Next

Related Content

Ask TOH users about Storage
Discuss

Contribute to This Story Below

Add Comment

    More in Living Spaces

    Tools List

    Close
    • drill
      Drill/Driver fitted with a countersink bit
    • circular saw
      Circular saw
    • router
      Router with ½inch straight bit

    Shopping List

    Close
    1. Locking casters; There should be 6 in all.

    2. Wood glue

    3. ½-inch plywood for backs and shelves.

    4. Pegboard

    5. ¾-inch plywood for work surface.

    6. 1x2 filler strip for furring out the pegboard.7. ⅝-inch plywood for bottoms and walls.

    8. Power strip suitable for workshop use.

    9. 1½-inch deck screws

    10. ½-inch straight router bit

    11. Pegboard hooks

    12. 5/16-inch carriage bolt, washer and nuts