Step 4: Blend the Resin and Hardener

Blend the resin and hardner
Photo: Brian Wilder
«»
Stahl pumps the two components of the epoxy filler—resin and hardener—onto a plastic board, then blends them thoroughly with a plastic putty knife. Epoxy doesn't stick to hard plastic surfaces, so the board and putty knife can be cleaned and reused.
Ask TOH users about Trim

Contribute to This Story Below

    More in Molding & Carpentry

    Tools List

    • putty knife
      Putty knife
    • paintbrush
      Paint brush
    • dremel
      Dremel or rotary tool

    Shopping List

    1. BORATE WOOD PRESERVATIVE

    2. EPOXY

    3. EPOXY PRIMER

    4. PLASTIC MIXING BOARD & PUTTY KNIFE
    (Epoxy doesn't stick to hard, plastic surfaces, so plastic supplies can be cleaned and reused)

    5. ACRYLIC PRIMER

    6. 100-PERCENT ACRYLIC PAINT