Step 3: Make the Slide-in Panels

For the lower panel, secure three slats spaced ¾ inch apart to two battens spaced 1 5⁄8 inches from the ends of the slats. Make the upper panel in the same manner, but be sure its battens extend ¾ inch past the bottom slat to create the gap between the slats.
Ask TOH users about Green

Contribute to This Story Below

    Tools List

    • circular saw
      Circular saw or jigsaw
    • drill

    Shopping List

    1. 1x4 cedar

    2. Wood glue

    3. 1 1/8-inch trim-head screws

    4. 2-inch trim-head screws