Step 11: Install the Rest of the Corner Pieces

hands installing the rest of the corner pieces to create a stone veneer fireplace surround
Photo: Wendell T. Webber
«»
Back-butter and install the rest of the corner pieces that wrap the opening and sides of the fireplace, using the process described above. Leave a finger's-width joint between each stone.
Next

Related Content

Ask TOH users about Fireplaces
Discuss

Contribute to This Story Below

Add Comment

    More in Interior

    Tools List

    Close
    • studfinder
      Stud finder
    • staple gun
      Staple gun
    • hammer
      Hammer
    • flat finishing trowel
      Finishing trowel
    • notched trowel
      Tiling trowel with 3/8-inch notch
    • angle grinder
      Grinder fitted with a diamond masonry blade
    • brick trowel
      Brick trowel
    • brick hammer
      Brick hammer
    • grout sponge
      Grout sponge or spray bottle
    • grout bag
      Grout bag
    • masonry striking tool
      Masonry striking tool
    • Whisk Broom
      Whisk broom

    Shopping List

    Close
    1. Stone veneer. Get about 20 percent more than you need to cover your fireplace, to accommodate fit and breakage.

    2. Builder's felt. It acts as a moisture barrier between the mortar and your walls to prevent water damage.

    3. Metal lath to install over the felt. It keeps the mortar in place, creating a base for the stone veneer.

    4. 3/8- or ½-inch staples.

    5. 15/8 -inch galvanized roofing nails.6. Veneer mortar. It contains special additives to create a strong bond between the stone veneer and the surface to which it's attached.

    7. Plastic sheeting. Tape it to your walls, floor, and hearth to protect them while you work.

    8. Painter's tape.

    9. Old drop cloth (optional).