Step 5: Mark the Tap Positions

Draw a horizontal line across the center of the mounting board using the straightedge of a combination square. Then mark evenly spaced vertical lines through the horizontal one to indicate where each tap will go.
Ask TOH users about Salvage

Contribute to This Story Below

    Tools List

    • 16-foot tape measure
      Measuring tape
    • combination square
      Combination square
    • drill
    • flathead screwdriver

    Shopping List

    1. Three porcelain taps and escutcheons

    2. Three dummy spindles

    3. Two shelf brackets

    4. Epoxy

    5. Barn wood for shelves