Step 10: Spot-Prime

John Dee sprays a fast-dry primer on spots with spackle or bare wood from sanding
Photo: Brian Wilder
«»
After vacuuming and tacking all the surfaces, spray a fast-dry primer on any spots with spackle or bare wood where the sandpaper "burned through" the primer. Wait an hour before sanding.
Ask TOH users about Kitchen Cabinets

Contribute to This Story Below

    Tools List

    • drill
      Drill-driver
    • paint scraper
      Paint scraper
    • putty knife
      Putty knife
    • shop vacuum
      Shop vacuum with drywall-dust filter
    • random orbit sander
      Random-orbit sander
    • chisel-tip paintbrush
      2½-in. chisel-tip with nylon-polyester bristles
    • eye goggles
      Goggles
    • dual cartridge respirator
      Respirator (fitted with organic-vapor cartridges)
    • rubber gloves
      Chemical-resistant rubber gloves (long-sleeve style)

    Shopping List

    1. Low-tack painter's tape

    2. Rosin paper

    3. 0.5-mil plastic sheet

    4. Tack cloth

    5. Liquid deglosser and abrasive pad

    6. Lint-free rags

    7. 100-grit silicon-carbide sandpaper

    8. Two-part polyester wood filler or autobody filler to fill dings or screw holes

    9. 220-grit silicon-carbide sandpaper to smooth primer between coats

    10. 280-grit silicon-carbide sandpaper to smooth paint between coats

    11. Sanding sponges, medium- and fine-grit12. Vinyl spackle

    13. Oil-based primer for use on smooth surfaces or tight-grained woods (cherry, maple, birch); or
    14. Brushing putty to prime and fill open-grained woods (oak, ash, hickory)

    15. Oil-based spray primer for touch-up

    16. Siliconized acrylic-latex caulk

    17. Oil-based paint Easier to clean and more durable than water-based, which softens when ex­posed to heat or oil.