Step 5: Complete the Pattern

marking the checker pattern on a floor
Photo: Kolin Smith
«»
Using a straightedge, extend the line out into the room. Mark the entire line at intervals to match the length of the side of each pattern square. Using a framing square as a right-angle guide, complete the squares at each mark. Double-check your layout by making sure you connect back to the marks on the first wall.
Next

Related Content

Ask TOH users about Painting
Discuss

Contribute to This Story Below

Add Comment

    More in Painting & Finishes

    Tools List

    Close
    • Sanding Sponge
      150-grit sanding sponge
    • paint roller with extension
      Paint tray and roller frame with extension pole
    • straight edge
      Ruler or yardstick
    • framing square
      Framing square
    • putty knife
      Putty knife
    • roller frames
      Mini roller frame
    • paintbrush
      2½-inch polyester-nylon paintbrush

    Shopping List

    Close
    1. porch and floor paint Stands up to foot traffic and scuffs better than wall paint. One gallon covers 300 square feet; you'll need enough base color for two coats and enough pattern color to cover half the floor with two coats.

    2. painter's tape Get tape labeled "delicate," which is the least tacky, so it won't pull up the base-coat paint when removed.

    3. ½-inch nap roller

    4. 3-inch mini foam roller

    5. water-based polyurethane (optional) For a top coat of added durability. Satin finish will look best.