Step 7: Add the Knobs

Tom Silva attaching knobs to the drawer fronts of the joined cabinets
Photo: Wendell T. Webber
«»
Drill two holes for the knobs in each drawer, making sure they're centered vertically and located about 4 inches in from each end. Hold each knob in place as you tighten the screw from the inside of the drawer.
Ask TOH users about Storage

Contribute to This Story Below

    Tools List

    • circular saw
      circular saw
    • hammer with nailset
      hammer and nail set
    • miter saw
      miter saw
    • hand saw
      hand saw
    • drill
      drill/driver
    • putty knife
      putty knife
    • paintbrush
      paint brush
    • paintroller
      roller cage with 3/8 inch nap cover
    • Phillips screwdriver
      screwdriver

    Shopping List

    1. ½-inch cabinet grade birch plywood. Get a 4x8 sheet.

    2. 18-inch base cabinets. Get three.

    3. 1x3 furring strips. Get two 10 foot boards.

    4. ½x2 lattice strips. Get two 8 foot boards.

    5. ½x1 lattice strips. Get two 6 footers.

    6. ¾ bed molding. Get one 8 footer.

    7. Push door catches. Get three. 8. Drawer knobs. Get six.

    9. Furniture feet. Get four.

    10. Corner foot plates. Get four.

    11. Medium grit sandpaper.

    12. Wood putty.

    13. Latex primer and paint.

    14. Metallic gold antiquing wax.