Step 2: Fasten the Cabinets Together

Tom Silva fastening two stock cabinets together
Photo: Wendell T. Webber
«»
Sandwich two 1x3 furring strips between the cabinets vertically to act as spacers. Using a drill/driver and 1 5/8 inch deck screws, fasten the cabinets together along the length of the strips, sinking the screws from both sides for added strength.
Next

Related Content

Ask TOH users about Storage
Discuss

Contribute to This Story Below

Add Comment

    More in Living Spaces

    Tools List

    Close
    • circular saw
      circular saw
    • hammer with nailset
      hammer and nail set
    • miter saw
      miter saw
    • hand saw
      hand saw
    • drill
      drill/driver
    • putty knife
      putty knife
    • paintbrush
      paint brush
    • paintroller
      roller cage with 3/8 inch nap cover
    • Phillips screwdriver
      screwdriver

    Shopping List

    Close
    1. ½-inch cabinet grade birch plywood. Get a 4x8 sheet.

    2. 18-inch base cabinets. Get three.

    3. 1x3 furring strips. Get two 10 foot boards.

    4. ½x2 lattice strips. Get two 8 foot boards.

    5. ½x1 lattice strips. Get two 6 footers.

    6. ¾ bed molding. Get one 8 footer.

    7. Push door catches. Get three. 8. Drawer knobs. Get six.

    9. Furniture feet. Get four.

    10. Corner foot plates. Get four.

    11. Medium grit sandpaper.

    12. Wood putty.

    13. Latex primer and paint.

    14. Metallic gold antiquing wax.