Step 10: Install the Door

this old house editor mark powers mounting the door hardware on the pet feeding station
Photo: Wendell T. Webber
«»
Turn the box over. Align the door so that its top edge sits flush with the top edge of the box, and the bottom sits flush with the underside of the bottom piece. Attach the door to the box using a 22-inch piano hinge positioned knuckle side out.
Next

Related Content

Ask TOH users about Pets
Discuss

Contribute to This Story Below

Add Comment

    More in Living Spaces

    Tools List

    Close
    • flathead screwdriver
      Screwdriver
    • pencil compass
      Pencil Compass
    • rasp
      Rasp
    • jigsaw
      Jigsaw
    • drill
      Drill/driver fitted with a 3/8-inch drill bit
    • combination square
      Combination Square

    Shopping List

    Close
    1. 1x12 laminated shelving board Get two 6-foot boards

    2. 1x2 Get one 6-foot board

    3. 1x3 Get one 6-foot board

    4. 1x4 Get at least 2 feet

    5. 2-quart dog dishes with lip edge Get two dishes

    6. 1 5/8-inch #6 trim head screws

    7. Wood glue

    8. Wood filler

    9. Contact paper

    10. Piano hinge Get one that's 18 to 22 inches long

    11. Magnetic door catch

    12. Friction door slide

    13. Door handle

    14. Latex primer

    15. Latex semi-gloss paint