Step 6: Mark the Tray Handles

this old house editor mark powers marking where the tray handles go with a pencil
Photo: Wendell T. Webber
«»
Make a line at the center of each 12-inch 1x4 tray side. Using the lip of the dog bowl as a template, make an two intersecting arcs centered on the line. Position one arc 1 inch away from the edge and the other arc 2½ inches away from the edge.
Ask TOH users about Pets

Contribute to This Story Below

    Tools List

    • flathead screwdriver
      Screwdriver
    • pencil compass
      Pencil Compass
    • rasp
      Rasp
    • jigsaw
      Jigsaw
    • drill
      Drill/driver fitted with a 3/8-inch drill bit
    • combination square
      Combination Square

    Shopping List

    1. 1x12 laminated shelving board Get two 6-foot boards

    2. 1x2 Get one 6-foot board

    3. 1x3 Get one 6-foot board

    4. 1x4 Get at least 2 feet

    5. 2-quart dog dishes with lip edge Get two dishes

    6. 1 5/8-inch #6 trim head screws

    7. Wood glue

    8. Wood filler

    9. Contact paper

    10. Piano hinge Get one that's 18 to 22 inches long

    11. Magnetic door catch

    12. Friction door slide

    13. Door handle

    14. Latex primer

    15. Latex semi-gloss paint