Step 4: Attach the Arms

attach the arms
Illustration: Gregory Nemec
«»
Cut two arms with a rounded front. Round over the end of a support block and attach it to the outside of each front leg. Screw the arms to the front legs and longer back brace.
Ask TOH users about Furniture

Contribute to This Story Below

    Tools List

    • jigsaw
      Jigsaw
    • drill
      Drill/driver

    Shopping List

    1. 6-inch pressure-treated decking You'll need about seven 6-footers to make the back slats, arm rests, seat supports, seats slats and front crosspiece.

    2. 4-inch pressure-treated decking Pick up two 6-footers to construct the back braces, front legs, and blocking for the arm rests.

    3. 1-inch pressure-treated baluster You'll need 44-inches of material for two 22-inch raisers to support the back braces.

    4. 100-grit sand paper

    5. 2-inch deck screws