Step 7: Attach the Feet

attach the feet
Photo: Kristine Larsen
«»
Now add the feet, using the tracings on the disk as a guide to make sure each foot is properly aligned. Remove the duct tape. Twist a nut onto each bolt, and tighten with a ratchet.
Ask TOH users about Salvage

Contribute to This Story Below

    Tools List

    • Natural Bristle Brush
      brush
    • pencil compass
      compass
    • jigsaw
      jigsaw
    • table vise
      vise
    • drill
      drill/driver
    • ratchet wrench
      ratchet

    Shopping List

    1. 3 Cast-iron Bathtub Feet, from salvage yards like Zaborski Emporium

    2. Clear Polyurethane

    3. Galvanized-tin Flower Bucket

    4. ¾-inch Plywood5. 2-inch Bolts with Nuts

    6. duct tape

    7. White Paint

    8. rag