Step 6: Bolt It

bolt it
Photo: Kristine Larsen
«»
Insert 2-inch bolts through the bucket holes from the inside out, and use duct tape to temporarily secure the head of each bolt. Turn the bucket over and place the wood disk on the bottom, fitting its holes over the bolts.
Ask TOH users about Salvage

Contribute to This Story Below

    Tools List

    • Natural Bristle Brush
      brush
    • pencil compass
      compass
    • jigsaw
      jigsaw
    • table vise
      vise
    • drill
      drill/driver
    • ratchet wrench
      ratchet

    Shopping List

    1. 3 Cast-iron Bathtub Feet, from salvage yards like Zaborski Emporium

    2. Clear Polyurethane

    3. Galvanized-tin Flower Bucket

    4. ¾-inch Plywood5. 2-inch Bolts with Nuts

    6. duct tape

    7. White Paint

    8. rag